HMI FRESNEL DESISTI REMBRANDT 6kW + BALLAST
Daily prices
Check our decreasing prices
Description
-
Discharge lamp at one end which allows a significant reduction in size and weight without compromising its performance and ensures a uniform field throughout the range from Spot to Flood focusing.
Stainless steel device housing (Inox). Robust frame, with reduced weight compared to other brands
Matt stainless steel, sandblasted and chemically treated stainless steel
Heat discharge lamps with two redistributed ends, 6kW
Two-stage igniter, eliminating the need for a high voltage insulated mobile internal cable.
Silent igniter operation also in flicker-free mode
Protection for high or low input voltage: Prevents ballast ruptures in the event of incorrect connection to the mains (for example 380 V)
Noiseless and fast selector
Self-adjusting cooling system
Double power outlet with automatic selection
Short circuit output and ground protection
Lamp power at constant output
Output frequency generated by quartz Specifications
-
ELECTRICITY
115-240V, 50 / 60Hz
25 'detachable ballast cable
Equipped with silent igniters to operate from electronic or magnetic ballasts
Weather resistant on / off push buttons
IP23 tested against rain
LAMP
6000w
High voltage insulated G38 bipolar socket for asymmetric HMI lamps
Capable of re-hot stamping
The clamp keeps the lamp firmly without stressing the electrical contacts
OPTICAL
20 ”(500mm) impact resistant borosilicate
FOCUS
Glass Fresnel lens
MECHANISM
Special bimetallic coated aluminum reflector for a high degree of reflectivity and thermal resistance for a long service life
Rear focus
Screw feed mechanism that guides a Teflon ring along a twisted brass rod
Ignition voltage ≅ 20/55 (under HOT RE-STRIKE conditions) KVs
Ballast connections: DEB 4/6 kW magnetic socket 6 kW
Connector type: 3 + 6 pins 26-32 male with nut - Type: 3-bayonet
Lamp holders: High voltage with lever clamping system
Protection class: Class 1 - earth connection required by ballast
Protection type IP 22
Max Case surface temperature: 220 ° Celsius
Weight of mounting device: 29 kg (MO)
BALLAST
Lamp power: 6000W
Nominal input voltage: 185-265V
Current input name 20A: (4K) at 220V, 31A (6K) at 220V
Efficiency value: 0.93
Power factor: 0.95
Drive setting: 35%
Weight: 35.2 kg
Dimensions: 381x533x381mmFLOOD
Distance Beam diameter Footcandles Lux F-Stop 7.6m 9.5m 440 4734 11 15.2m 19.1m 110 1184 5.6 22.9m 28.6m 49 527 4 30.5m 38.1m 28 301 2.8 SPOT
Distance Beam diameter Footcandles Lux F-Stop 7.6m 0.8m 6960 74,890 45 15.2m 1.6m 1740 18,722 22 22.9m 2.4m 773 8317 16 30.5m 3.2m 435 4680 11 *F-Stop: ratio of the focal length of the lens to the diameter of the entrance pupil
With ISO 100 film at 1/8 sec.